Custom Search

Resetter Printer Canon iP1000, Canon iP1200, Canon iP1300, Canon iP1500, Canon iP1600, Canon iP1700, Canon iP2200 | Waste Ink Counter Reset


This tutorial contains about how to reset canon iP series, before reset using general tools you must reset the printer hardware ( see reset manual ). Following this tutorial and software resetter to reset Canon Pixma iP series.

Step 1 | Waste Ink Counter Reset Manual for Service mode for Canon PIXMA iP1xxx ( Hard Reset )
Canon PIXMA IP1000, IP1200, IP1500, IP1600, iP2200

  1. Turn off the printer. And disconnect the printer cable

  2. Press and hold the POWER button, turn on the printer

  3. The indicator (L.E.D.) should be green

  4. Press and release the RESUME button , the indicator (L.E.D.) should be orange

  5. Press and release the RESUME button again, the indicator (L.E.D.) should be green

  6. Release both buttons.
Canon PIXMA iP 1300, iP1700
  1. Turn off Canon Pixma iP1700, iP1300 Printers

  2. Hold down Resume button and press Power button

  3. Keep holding down Power button and let Resume button

  4. Press Resume button 2 times then let BOTH buttons go

  5. Green lights will flash and then stop blinking

  6. When green lights are solid, press the Resume button 4 times

  7. Press the Power button and the Canon Pixma iP1700, iP1300 Printers should turn off, if not, press the Power button once more

  8. Your Canon Pixma iP1700, iP1300 Printers should respond as normal
Step 2 | Waste Ink Counter Reset Using Software Resetter for Permanent
Canon Pixma iP1000, iP1500 Resetter Tool Software

  1. Download Service Tool : iP1000 Service Tool, iP1500 Service Tool

  2. Install your printer driver and service tool

  3. Make sure the printer must in service mode (temporary reset)

  4. Run Tool service and select (USB PORT)

  5. Choose SET DESTINATION 1 And it should be reset

  6. Unplug electric power, plug again and turn on printer (wait until the no flashing lamp)
Canon Pixma iP1200, iP1600 Resetter Tool Software
  1. Download Service Tool : iiP1200 Service Tool, iP1600 Service Tool, iP1200 Service Tool

  2. Run GeneralTool.exe and select USB PORT

  3. Click lock release, and select the applicable model name in set destination

  4. In clear waste ink counter, select main or platen. The selected waste ink counter will be reset. main resets the main waste ink counter, flaten resets the platen waste ink counter
If both the main and platen waste ink absorbers are replaced, reset both the main and platen waste ink counters.

Canon Pixma iP1300, iP1700 Resetter Tool Software
  1. Download Service Tool : iP1300 Service Tool, iP1700 Service Tool

  2. Unzip file and run GeneralTool.exe

  3. Select USB Port where the Canon iP1300 or Canon iP1700 installed

  4. Click Lock release button

  5. Select EEPROM CLEAR

  6. Click Test Pattern 1 button

  7. Your Canon Pixma iP1700, iP1300 Printers should respond as normal.



Good Luck

Related Posts:



8 comments:

Sntq said...

Mas mw nanya kq tiap selesai di reset pke general tool tiap restart mesti mereset trus. printer q ip1880.mhon bantuannya

admin said...

itu resetnya pake hard reset ato pake software

Anonymous said...

ada softwarenya y buat yg pixma 1880??
minta donk bozz

Sntq said...

Pertama pke yg hard reset it
trus pke software general tool it
berhasil indikatornya jd full tapi pass drestar
koq di minta direset lagi
jadi skrang w gk mw pke tu geneatortool..
pa mgkin w slh make softwareny it atau apa nie??
Mhn Bntuannya ya!!
thanks y atas responya

admin said...

@Sntq : silahkan buka http://azkacomputer.blogspot.com/2009/08/resetter-canon-pixma-ip-1880.html

Eka said...

mas bisa minta link DL ip 1200 service tool ny yg lain..sepertinya sudah error itu link nya..dan cara ip 1200 nya itu disconnect cable power or usb mas?
link bisa di kirim ke email saya kalau berkenan..
ranneka777@plasa.com
terima kasih
nice info

G.Mustafa said...

Very well done WL Team. Some may complain, but it's not hard to copy and paste a link into the browser if needed.

muhammadrazzaq said...

Well, this is one thing I'm getting on my wishlist for this year :-)

Post a Comment