Custom Search

How To Reset Printer Canon Pixma iX5000 / iX4000 | Warning: The waste ink absorber becomes almost full on Canon Pixma iX5000 / iX4000.

Waste Ink Counter Resetting Operation Procedures :
  1. With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons. The Power LED lights in green to indicate that a function is selectable.)
  2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.)
  3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
  4. When the Power LED lights in green*1, press the Resume/Cancel button 2 times. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm LED.)
Notes :
  1. *If the LED does not light in green (the printer does not enter the service mode), disconnect the power cord and plug it again. Then start from step 1) to start the printer in the service mode again. If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode.
  2. *If the Resume/Cancel button is pressed 22 or more times, the Alarm or Power LED lights steadily without any changes.

Related Posts:



1 comments:

言風 said...

人不能像動物一樣活著,而應該追求知識和美德 ..................................................

Post a Comment